• Rugged construction, capable of withstanding the abuse of the production environment
• Digital speed control with encoder feedback
• Selectable speed range from 6 to 1200 ipm (15 - 3048 cpm)
• Test angle is selectable between 90° and 180°
• One load cell is included with the machine (2, 5, 10 or 25 pound capacities available)
• Test samples as short as 1/2" to as long as 12" (12mm - 305mm)
• Operating temperature range 32° - 150° F (0° - 70° C)
• Capable of stand-alone operation with integrated digital display
• Data can be downloaded to EZ-Lab software for complete data management
• Accurate to ± 0.1% of load cell range
• Capable of pulling up to 25 pounds (12 Kg) (dependant on selected lower speeds)
• Standard input voltage - 120 VAC (50/60hz)

Data Acquisition System

The ChemInstruments electronic data acquisition system is a state-of-the-art microprocessor controlled force measurement package that combines accuracy with ease of use. This system simultaneously controls test motion, reads the force of a test from a load cell, digitally displays it and also stores that data in its memory.

• Records 400 data points per second during a test interval
• Displays the average, high and low measured force results immediately upon completion of a test
• Stores data from up to 20 tests, allowing for quick review of previously recorded values
• Export data by RS-232 connection to a local PC with our EZ-Lab software
• Displays test values in grams, kilograms, ounces, pounds or Newtons

EZ-Lab Compatible

Remote setup, operational control and enhanced data collection are all possible when coupled with our EZ-Lab data management software. This application requires an external PC. (See more information about the EZ-Lab product)

Calibration Service

Calibration Service is available for this equipment

Essential

• Test panel - 2" x 6" (50mm x 150mm)
• Hand roller - 4.5 lb (2 Kg)
• Specimen tape cutter - 1" (25mm)

(above items are all included in our accessory package - ATA)

Non-Essential

• EZ-Lab data management software
• Coefficient of Friction fixture
• Heated testing stage
• Chilled water testing stage
• Various test panel sizes and materials
• Custom sized hand rollers
• Various sized specimen tape cutters
• Test panel holder

• Input voltage - 240 VAC (50/60hz)
• Additional load cell capacities available: 2, 5, 10 and 25 pounds
• PSTC and TLMI testing manuals and videos

Height:	24" (61 cm)
Width:	36" (91 cm)
Depth:	13" (33 cm)
Weight:	92 lbs (42 Kg)

Some of the more popular test methods that this device is capable of performing.

• PSTC: 101 (A, B, C, D, E, F), 4, 15, 55
• ASTM: D 3330
• TLMI: L-IA1, L-IA2, L-IA3
• AFERA: 4001 P11
• FINAT: FTM 1-6, 10, 11